ALUMA BRIGHT H.D.™ is an industrial aluminum cleaner and brightener designed to remove dirt,
grease, exhaust stains, road film and oxidation from even the dirtiest aluminum surface. The
surfactants and penetrates contained in ALUMA BRIGHT H.D.™ promote the rapid emulsification
of soils and cut cleaning time to a minimum, and since ALUMA BRIGHT H.D.™ is a concentrate
it may be diluted as much as 1:50 with water making it very economical to use.
ALUMA BRIGHT H.D.™ is an acid type aluminum cleaner and brightener and must be diluted prior
to use. The exact dilution ratio will depend on the surface to be cleaned and the amount and type of
soil, however, a 1:50 dilution ratio is the recommended ratio for most applications. ALUMA
BRIGHT H.D.™ may be brushed on the surface to be cleaned or sprayed on with high pressure
washer equipment. When applied through high pressure washers, ALUMA BRIGHT H.D.™ should
be injected downstream by means of some type of chemical pump or siphon device in that this type
acid product may cause damage to high pressure pumps and heating coils. When cleaning with
ALUMA BRIGHT H.D.™ , always apply from the bottom up, allow several minutes stand time (do
not allow to dry) and then rinse from the top down. DO NOT ALLOW THIS PRODUCT TO DRY
ON ANY SURFACE.
ALUMA BRIGHT H.D.™ can be used on over the road trailers for cleaning and brightening
aluminum rails, fuel tanks on power units (tractors), aluminum tankers and any other aluminum
surface that becomes dull due to soil contamination and oxidation.
ALUMA BRIGHT H.D.™ contains hydrofluoric acid and should be handled with care and proper